ZOOM F8N Audio Recorder/Mixer

$75

Category: Brand:

Description

  • 8-channel/10-track field audio recorder/mixer
  • 8 discrete inputs with locking Neutrik XLR/TRS combo connectors
  • Compact and lightweight aluminum chassis, weighing just
    2 pounds (without batteries)
  • High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN
  • Switchable +4dB inputs with mic/line options for both XLR and TRS
  • Advanced Look-Ahead Hybrid Limiters
  • Zoom AutoMix™ software
  • Support for up to 24-bit/192 kHz recording, and 44.1 kHz, plus 47.952 kHz/48.048 kHz for HD video compatibility;
    16-/24-bit resolution
  • Accurate Time Code (0.2 ppm when on and up to 0.2 ppm when powered off) I/O on standard BNC connectors; dropframe/non-drop formats with Jam Sync
  • Three different power supply options: 8x AA batteries, external DC battery pack with Hirose connector, or 12V AC adapter (AA’s and DC battery pack not included)
  • Dedicated gain control knob, 6-segment LED level meter, and PFL/Solo switch for each channel
  • High pass filter, phase invert, and Mid-Side decoder
  • Input delay of up to 30 msec per channel / output delay of up to 10 frames per output
  • Compatible with Zoom microphone capsules; optional extender cable enables remote positioning
  • Dual mini-XLR (TA3) balanced Main Outs plus ⅛” stereo mini-jack Sub Out
  • Dedicated headphone output (100 mW) with front panel volume control
  • 2.4″ full-color backlit LCD with monochromatic mode
  • Dedicated PFL display with viewable trim settings
  • Dual SD/SDHC/SDXC card slots, up to 512 GB each
  • Records in BWF-compliant WAV or MP3 file formats
  • Support for extensive metadata (BWF and iXML); input time, date, project, scene number, etc.
  • Built-in slate mic/slate tone with front panel switch
  • Use as an 8-in/4-out USB audio interface (@ 96 kHz)
  • Free Zoom F8 Control App for iOS allows wireless remote control, file renaming, and metadata entry

 

Reviews

There are no reviews yet.

Be the first to review “ZOOM F8N Audio Recorder/Mixer”

Your email address will not be published. Required fields are marked *

Recording media Dual SD card slots supports: 16MB–2GB SD cards, 4GB–32GB SDHC cards and 64GB–512GB SDXC cards Inputs 1-8 Connectors: XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) Input source set to Mic Input gain: +10 – +75 dB Input impedance: 2 kΩ Maximum input level: +14 dBu (at 0 dBFS, limiter ON) Phantom power: +24/+48V 10mA maximum for each channel Input source set to Line Input gain: -10 – +55 dB Input impedance: 2.6 kΩ Maximum input level: +24 dBu (at 0 dBFS, limiter ON) INPUTS: ADDITIONAL INFO Equivalent input noise: −127 dBu or less (A-weighted, +75dB input gain, 150Ω input) Frequency characteristics: 10 Hz – 80 kHz +0.5dB/−1dB (192kHz sampling rate) A/D dynamic range: 120 dB typ (−60dBFS input, A-weighted) Crosstalk: −90 dB or less (between adjacent channels, 1kHz) MIC IN: ZOOM mic capsule input (use disables Inputs 1/2) SLATE MIC: Built-in mic for voice memos can be assigned to tracks freely Outputs : MAIN OUT 1/2 Connectors: TA-3 connectors, balanced output (2: hot) Output impedance: 150 Ω or less Reference output level: −10 dBV (normal output level), +4 dBu (Output Level: Line), 1 kHz, 600Ω load Maximum output level: +10 dBV (normal output level), +24 dBu (Output Level: Line), 1 kHz, 600Ω load OUTPUTS: SUB OUT 1/2 Connector: 3.5mm stereo mini unbalanced output jack Output impedance: 100 Ω or less Reference output level: −10 dBV (normal output level), −40 dBV (mic output level), 1 kHz, 10kΩ load Maximum output level: +10 dBV (normal output level), -20 dBV (mic output level), 1 kHz, 10kΩ load HEADPHONE Connector: 1/4" unbalanced stereo output jack Output impedance: 15 Ω or less Maximum output level: 100mW + 100mW (32Ω load) D/A D/A dynamic range: 106 dB typ (−60dBFS input, A-weighted) RECORDING FORMATS: WHEN WAV SELECTED Supported formats: 44.1/47.952/48/48.048/88.2/96/192kHz, 16/24-bit, mono/stereo//2-10ch poly, BWF and iXML Maximum simultaneous recording tracks: 10 (8 inputs + stereo mix) 8 (at 192kHz sampling rate) RECORDING FORMATS: WHEN MP3 SELECTED Supported formats: 128/192/320kbps, 44.1/48kHz, ID3v1 tags Maximum simultaneous recording tracks: 2 RECORDING TIME Using a 32GB card: 30:51:00 (48 kHz/24-bit stereo WAV) 7:42:00 (192 kHz/24-bit stereo WAV) TIME CODE Connector: BNC Modes: Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to timecode) Frame rates: 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D Precision: ±0.2 ppm Supported input levels: 0.2 – 5.0 Vpp Input impedance: 4.6 kΩ Output level: 3.3 Vpp Output impedance: 50 Ω or less POWER SUPPLIES Batteries: 8 AA AC adapter: AC adapter: AD-19 DC12V 2A (center plus) External DC power supply: HIROSE HR10A-7R-4S 4-pin connector (1 pin: −, 4 pin: +), 9–18 V Power consumption: 15 W Continuous recording time When recording 2 channels at 48kHz/16-bit to SD1 with MAIN/SUB OUT OFF, TIME CODE OFF, LED/LCD Brightness 5, 32Ω head- phones, PHANTOM OFF Alkaline batteries: 6 hours or more NiMH (2450mAh): 8.5 hours or more Lithium batteries: 12 hours or more Continuous recording time when recording 8 channels at 48kHz/24-bit to SD1 with MAIN/SUB OUT OFF, TIME CODE OFF, LED/LCD Brightness 5, 32Ω head- phones, PHANTOM OFF Alkaline batteries: 3.5 hours or more NiMH (2450mAh): 6 hours or more Lithium batteries: 8 hours or more Continuous recording time when recording 8 channels at 192kHz/24-bit to SD1 with MAIN/SUB OUT ON, TIME CODE Int Free Run, LED/LCD Brightness 60, 32Ω headphones, PHANTOM 48V Alkaline batteries: 1 hour or more NiMH (2450mAh): 2 hours or more Lithium batteries: 3 hours or more Display 2.4" full-color LCD: 320x240 USB: Mass storage operation Class: USB 2.0 High Speed USB: Multi Track audio interface operation (driver required for Windows, not required for Mac) Class: USB 2.0 High Speed Specifications: 44.1/48/88.2/96kHz sampling rate, 16/24-bit , 8 in/4 out USB : Stereo Mix audio interface operation (no driver required) Class: USB 2.0 Full Speed Specifications: 44.1/48kHz sampling rate, 16-bit , 2 in/2 out Audio Interface with rec. (driver required for Windows, not required for Mac) Class: USB 2.0 High Speed Specifications: 44.1/48 kHz sampling rate, 16/24-bit , 10 in/4 out *Note: iOS device audio interface operation supported (stereo mode only) External dimensions Main unit: 7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) 178.2 mm (W) × 140.3 mm (D) × 54.3 mm (H) Weight Main unit only: 2.2 pounds (1000 g)