Shogun Flame
Shogun Flame back

Atomos Shogun Flame 7″ Monitor / Recorder

Description

The Atomos Shogun Flame is a 7″, 1920 x 1200 on-camera recording monitor that combines 4K recording with a 10-bit FRC panel that supports native display of HDR (log) footage as well as high brightness viewing of Rec. 709 footage. It utilizes 4K HDMI and 12G-SDI inputs to support clean output signals at resolutions up to UHD 4K (3840 x 2160), recording it to 2.5″ SSDs using 10-bit, 4:2:2 Apple ProRes and Avid DNxHR codecs. It even supports DCI 4K (4096 x 2160) raw video streams over SDI from select Sony and Canon cameras, encoding it as ProRes/DNxHR files.

The monitor features 10-bit FRC processing and AtomHDR display technology support a 10-stop brightness range, allowing you to more accurately monitor your log gamma footage without having to view flat, washed-out looking images or use a LUT to compress the dynamic range and color space. The monitor offers built-in pre-sets to accurately translate popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras. The settings only affect viewing, with recorded video remained unaltered.

In addition to HDR monitoring, the monitor also offers a High Bright mode for traditional Rec. 709 monitoring. This mode takes advantage of the full 1500 cd/m² brightness to allow for more confident monitoring in bright outdoor environments, even without a sun hood. In HDR mode, use of an included snap-on sun hood is required, as displaying a wider brightness range reduces the overall brightness of the monitor.

Built to withstand the rigors of production, the Shogun Flame features built-in protective armor that features silicone-covered corners and chamfered edges. Compared to the original Shogun, the Flame now features dual Sony L-Series battery plates that support battery hot-swapping, enabling longer run times. For audio recording, the monitor supports balanced XLR inputs with +48V Phantom Power via an included audio breakout cable. Additional features included Genlock / LTC input, SDI/HDMI cross-conversion, and a variety of onscreen exposure analysis, framing, and focus assist tools. Two NP-F750 batteries are included, along with a fast charger, D-tap power cable, AC power adapter, control cable, USB 3.0 docking station, and five Master Caddy SSD/HDD cases. All items come packaged in a custom HPRC hard case.

Monitor

1920 x 1200 resolution
10-bit FRC monitoring processing
1500 cd/m² brightness
AtomHDR technology displays 10 stops of dynamic range to natively display HDR (log) footage
Presets for viewing log gamma curves from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras
High Bright mode for Rec. 709 viewing
Supports custom 3D LUTs (.cube format)
Anamorphic de-squeeze: 2x, 1.5x, 1.33x, Panasonic 8:3
4K UHD downscale for HD monitoring

Input/Output

4K HDMI and 12G-SDI inputs / outputs
SDI/HDMI cross-conversion
Genlock / LTC input
Audio breakout cable for XLR audio input

Recording

UHD 4K recording at 24/25/30 fps
1080p recording up to 120 fps
10-bit 4:2:2 ProRes and DNxHR recording to SSD/HDD media
4K raw to ProRes/DNxHR recording over SDI from Sony FS700, Sony FS7, Canon C300 Mark II, and Canon C500
Pre-roll record (HD 8 seconds, 4K 2 seconds)
Custom time-lapse mode
10 metadata fields

Additional Features

Dual Sony L-Series battery slots support hot-swappable for continuous power
Built-in armor with silicone-covered corners
Audio level meters and mic level adjustment
Snap-on sun hood
Two NP-F750 batteries and fast charger included
Custom HPRC hard case

Reviews

There are no reviews yet.

Be the first to review “Atomos Shogun Flame 7″ Monitor / Recorder”

Your email address will not be published. Required fields are marked *

Display Type 7.1" (18 cm) IPS capacitive touchscreen Resolution 1920 x 1200 325 ppi Bit Depth 10-bit (8-bit plus FRC) Video Aspect Ratio Native: 16:9 Brightness 1500 cd/m² LUT Support 3D LUT (.cube file format) Interface Inputs 1 x HDMI (1.4b) 1 x 12G-SDI (BNC) 1 x Genlock / LTC (BNC) 1 x 2.5 mm LANC 2 x XLR (included LEMO breakout cable required) Outputs 1 x HDMI (1.4b) 1 x 12G-SDI (BNC) 2 x XLR Out (included LEMO breakout cable required) 1 x 3.5 mm headphone jack Supported Video Format Supported Signal Input: 10- / 8-bit 4:2:2 (dependent on video source) Output: 10- / 8-bit 4:2:2 (dependent on video source) Input/Output Resolutions HDMI: 2160p 24/25/30 1080p 24/25/30/50/60/120 1080i 50/60 720p 50/60 SDI: 2160p 24/25/30 1080p 24/25/30/50/60/120 1080psf 24/25/30 1080i 50/60 720p 50/60 Video Signal Conversion HDMI to SDI: 2160p 24/25/30 1080p 24/25/30/50/60/120 1080i 50/60 720p 50/60 SDI to HDMI: 2160p 24/25/30 1080p 24/25/30/50/60/120 1080i 50/60 720p 50/60 Encoding Formats DCI RAW 4096x2160 from Supported cameras (Sony FS700, Sony FS7, Canon C300 MKII, Canon C500): Apple ProRes HQ, 422, LT DNxHR HQX, HQ, SQ, LB UHD 4K (3840 x 2160): Apple ProRes HQ, 422, LT DNxHR HQX, HQ, SQ, LB 1920 x 1080 Apple ProRes HQ, 422, LT DNxHD 220x, 220, 145, 36 Pulldown Conversion 24/25/30psf to 24/25/30p (2:2 pulldown) 60i to 24p (3:2 pulldown) Supported Audio Formats HDMI 2 or 8-channel, up to 24-bit (camera dependent) SDI Up to 12-channel, 48 kHz, up to 24-bit (camera dependent) Dynamic Range > 90 dB Signal Level Maximum: +24 dBu Gain Maximum Analog Gain: +52 dB Phantom Power +48 V phantom power for XLR inputs Remote Operation HDMI Auto HDMI trigger Supported Protocols: Canon, Sony, Atomos Open Standard SDI SDI trigger camera selectable LANC Supports slave configuration Recording Media Supported Media 4K 2.5" SSD HD High Frame Rate (50/60/120p): 2.5" SSD 2.5" HDD (7,200 rpm and up) for 1080p 50/60 HD (30p and less): 2.5" SSD 2.5" HDD (5,400 rpm and up) Note: Only use media that has been approved by Atomos Master Caddy Dock Interface: 2.5" SATA to USB 2.0/3.0 Supported Applications Final Cut Pro X/7+ Avid Media Composer 5.0+ Adobe Premiere 5.5+ Grass Valley EDIUS 6.0+ Sony Vegas Pro 10+ Lightworks Autodesk Smoke 2015 XML Support FCPX XML native, FCP7 supported with conversion (Adobe compatible) General Power Requirements 6.2 to 16.8 VDC (battery or DC power input) Power Consumption 10 to 24 W Supported Battery Types 2 x Sony L-series Battery Life 5200 mAh: up to 1.5 hours (monitor and record 4K) 7800 mAh: up to 2.2 hours (monitor and record 4K) Construction ABS polycarbonate Dimensions 8.4 x 5 x 1.8" (21.4 x 12.7 x 4.5 cm)