Arri Skypanel S60 LED Soft Light

Lamphead S60-C Optical System Soft Diffusion Panel Light Aperture 645 x 300 mm / 25.4 x 11.8" Beam Angle 115º (Half Peak Angle) Weight Manual Version: approx. 13 kg / 29 lbs Pole Op Version: approx. 14 kg / 31 lbs Packed Weight: Manual Version: approx. 21 kg / 46 lbs Pole Op Version: approx. 22 kg / 49 lbs Size (H x W x L): 433 x 133 x 825 mm / 17 x 5.3 x 32.5" Packed Size (H x W x L): 460 x 300 x 856 mm / 18 x 11.8 x 33.7" Handling Aluminium Yoke, High Strength Tilt Lock Pole Operation Option (Pan & Tilt) Mounting 28 mm Spigot (Junior Pin) Tilt Angle +/- 90º Lamphead Voltage Input 48 V DC Power Consumption 420 W Nominal, 450 W Maximum Lamphead Power Connection Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive) Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) Battery DC Voltage Range 23 to 36 V DC Battery Mode Light Output 50 % of total output White Light 2,800 K to 10,000 K continuously variable correlated color temperature Colored Light Full RBG+W Color Gamut with Hue and Saturation Control Color Temperature Tolerance +/-100 K (nominal), +/-1/8 Green-Magenta (nominal) Color Rendition CRI Average > 95 TLCI Average > 90 Green-Magenta Adjustment Continuously adjustable (Full Minusgreen to Full Plusgreen) Dimming 0 to 100 % continuous Control On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net Remote Device Management (RDM*) DMX Setup, Hour Counter and Standard RDM Commands Software Interface Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software upgrade via flash drive Housing Color Blue/Silver, Black Ambient Temperature Operation -20 to +45ºC / -4 to +113ºF Protection Class / IP Rating III / IP20 Estimated LED Lifetime (L70) 50,000 hours Estimated Color Shift Over Liftetime +/- 5 % Certifications CE, CB, ENEC, cNRTLus, FCC, PSE Power Supply Unit S60 PSU Power Supply Input Range 110 to 240 V ~, 50/60 Hz Power Supply Output Range 48 V DC Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison cables available) Power Output Connection Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) Weight 3.5 kg / 7.7 lbs Dimension 383 x 191 x 91 mm / 15 x 7.5 x 3.6" Control On-Board On/Off Switch Mounting SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter Certifications CE, CB, ENEC, cNRTLus, PSE